| | |
| 0178 | Identification of Residual Products from Six Different Resin Cements
S.H. ALTINTAS1, B. BAGIS2, A. YASAR1, and A. USUMEZ3, 1Karadeniz Technical University, Trabzon, Turkey, 2Karadeniz Technical University, Faculty of Dentistry, Trabzon, Turkey, 3Gaziantep University, Turkey |
| 0179 | Mechanical properties of various mixing ratios of a dual-curing resin-cement
B.J. STEMPLINGER, M. BEHR, and G. HANDEL, Regensburg University Medical Care Center, Germany |
| 0180 | Evaluation of Two New Veneering Techniques for Zirconia-based FDPs
T. ALBRECHT, F. PERKON, S. HEINTZE, and H. KAPPERT, Ivoclar Vivadent, Schaan, Liechtenstein |
| 0181 | Effects of fluoride on structure,morphology and hardness of plastic brackets
C. TZIAFA1, S. ZINELIS2, T. ELIADES3, and G. ELIADES1, 1University of Athens (EKPA), Greece, 2University of Athens, Greece, 3University of Thessaloniki (AUTH), Greece |
| 0182 | Porosity evaluation of ormocer- and dimethacrylate-based composites using X-ray micro-tomography
M.M. HAMMAD1, L.M. CAVALCANTE1, L.F.J. SCHNEIDER1, A. QUALTROUGH1, and N. SILIKAS2, 1The University of Manchester, United Kingdom, 2University of Manchester, United Kingdom |
| 0183 | Measurement of shore hardness on thin samples
M. BRADEN, A. SIDDIQUI, M. PATEL, and S. PARKER, Barts and the London School of Medicine and Dentistry, United Kingdom |
| 0184 | Evaluation of different impression materials by Shark- fin test
K. STEBNER, C. KOLBECK, R. LANG, and G. HANDEL, Regensburg University Medical Center, Germany |
| 0185 | Flexural strengths of self-adhesive resin cements
E. MAGNI, F. PAPACCHINI, I. CONIGLIO, M. SEDDA, and M. FERRARI, University of Siena, Italy |
| 0186 | Elastic moduli of resin-composites with silorane, ormocer and dimethacrylate matrices
L.M. CAVALCANTE, L.F. SCHNEIDER, K. MASOURAS, N. SILIKAS, and D. WATTS, The University of Manchester, United Kingdom |
| 0187 | Microhardness of Flowable Composite Light-cured through Fibre-reinforced Composite
W.M.M. FENNIS1, N. RAY2, C.M. KREULEN1, and N.H.J. CREUGERS1, 1Radboud University Nijmegen Medical Centre, Netherlands, 2National University of Ireland, Cork, Ireland |
| 0188 | Influence of storage on the mechanical properties of resin cements
E. MAGNI1, N. ILIE2, R. HICKEL3, and M. FERRARI1, 1University of Siena, Italy, 2Ludwig-Maximilians University Munich, Germany, 3Ludwig-Maximilians-University, Munich, Germany |
| 0189 | Linear dimensional stability in tissue- conditioners
G. BAYRAKTAR, C. BURAL, D. BIRLER, I. BAYRAMGURLER, and M. TEMIZKAN, University of Istanbul, Turkey |
| 0190 | Factors Affect Porosity of Injectable Glass Ionomer Cement
J. LUO, A.J. BUSHBY, and G.J. PEARSON, Queen Mary University of London, United Kingdom |
| 0191 | Nano-dynamic-mechanical Properties of a Nano-composite as Function of Curing Time
N. ILIE, Ludwig-Maximilians University Munich, Germany, and R. HICKEL, Ludwig-Maximilians-University, Munich, Germany |
| 0192 | Artefacts caused by dental materials in MRI and CT
T. KLINKE, J. WETZEL, and R. BIFFAR, University of Greifswald, Germany |
| 0193 | Shrinkage/Expansion Strain of Three Luting Cements During Setting
M. AL-RABAB'AH, and H. DEVLIN, University of Manchester, United Kingdom |
| 0194 | The Effect of Phosphate Buffered Saline on Mineral Trioxide Aggregate
M. LOTFI1, S. VOSOUGHHOSSEINI2, S. BAKHSHI SHAYAN3, and B. RANJKESH3, 1Department of Endodontics and Research center for pharmaceutical Nanotechnology/Tabriz Univerity of Medical Sciences, Iran, 2Department of Oral Pathology and Research Center for Pharmaceutical Nanotechnology, Tabriz University of Medical Sciences, Iran, 3Dental School, Tabriz University of Medical Sciences, Iran |
| 0195 | Surface Topographic Image of Mineral Trioxide aggregate and Portland Cement
S. VOSOUGH HOSSEINI1, M. LOTFI2, B. RANJKESH3, and S. BAKHSHI SHAYAN3, 1Department of Oral pathology and Research Center for Pharmaceutical Nanotechnology, Tabriz University of Medical Sciences, Iran, 2Department of Endodontics and Research Center for Pharmaceutical Nanotechnology, Tabriz Univerity of Medical Sciences, Iran, 3Dental School, Tabriz University of Medical Sciences, Iran |
| 0196 | Microhardness of self-adhesive compared to conventional resin cements
R. OSORIO1, R. FULGENCIO2, R.M. CARVALHO3, F.S. AGUILERA1, E. OSORIO1, and M. TOLEDANO1, 1University of Granada, Spain, 2Universidade Gama Filho, Rio de Janeiro, Brazil, 3Bisco, Inc, Schaumburg, IL, USA |
| 0197 | Flexural strength of self-adhesive resin cements
R. FULGENCIO1, A. PINTO2, R.M. CARVALHO3, R. OSORIO4, F.S. AGUILERA4, and M. TOLEDANO4, 1Universidade Gama Filho, Rio de Janeiro, Brazil, 2Instituto superior de ciencias da saude, Monte Caparica, Portugal, 3Bisco, Inc, Schaumburg, IL, USA, 4University of Granada, Spain |
| 0198 | Evaluation of dental alginates impression materials in special needs kids
L. LAFFRANCHI1, B. CROVATO2, D. DALESSANDRI1, F. ZOTTI3, P. FONTANA4, and L. VISCONTI3, 1Università degli studi di Torino - Dipartimento di scienze biomediche e oncologia umana, Italy, 2University of Brescia, Italy, 3Università di Brescia, Italy, 4Faculty of Dentistry, University of Brescia, Italy |
| 0199 | In-vitro characterisation of voids within resin-composite restorations using micro-CT
H. ELBISHARI, N. SILIKAS, and J.D. SATTERTHWAITE, University of Manchester, United Kingdom |
| 0200 | Rheological characterisation of a commercial glass poly(vinylphosphonate) cement
P. BROOKBANK1, O. GHITA1, M.E. BARBOUR2, and K. EVANS1, 1University of Exeter, United Kingdom, 2University of Bristol, United Kingdom |
| 0201 | Comparison of the transverse strength of six acrylic denture resin
F. UNALAN, University of Istanbul, Turkey, O. GURBUZ, Private practice, Istanbul, Turkey, and I. DIKBAS, Yeditepe University, Istanbul, Turkey |
| 0202 | Comparative study of impact strength of six acrylic denture resin
I. DIKBAS, Yeditepe University, Istanbul, Turkey, O. GURBUZ, Private practice, Istanbul, Turkey, and F. UNALAN, University of Istanbul, Turkey |
| 0203 | Light Stability of a Silorane and a Methacrylate Composite
J. BRODESSER, A. SYREK, C. THALACKER, A. STIPPSCHILD, O. KAPPLER, W. WEINMANN, and R. GUGGENBERGER, 3M ESPE, Seefeld, Germany |
| 0204 | PEEK- a potential dental biomaterial
T. SPINTIG1, W.-D. MUELLER2, and C. ABERT1, 1Humboldt-Universitat, Berlin, Germany, 2Humboldt-Universität, Berlin, Germany |
| 0205 | Effect of delay in layering particulate filler resin composites
A. MESE, Dicle University, School of Dentistry, Diyarbakır, Turkey, and M. ÖZCAN, University Medical Center Groningen, Netherlands |
| 0206 | Storage Stability of Dibenzoylperoxide Derivatives in Different Monomers
A. GIANASMIDIS, A. BROT, F. ZEUNER, P. BURTSCHER, V. RHEINBERGER, and J.-F. ROULET, IvoclarVivadent AG, Liechtenstein, Switzerland |
| 0207 | Material Properties of Self-adhesive Resin Cements: a Comprehensive Performance Profile
C.A. WIEDIG, R. HECHT, G. RAIA, and M. LUDSTECK, 3M ESPE AG, Seefeld, Germany |
| 0208 | Rheology of Dental Restorative Cements that Includes Fumed Silica Nanoparticles
N. ZALTSMAN, A. VALDMAN, B. ZALSMAN, K. LIZENBOIM, A. KHASKIN, A. SUVOROV, and I. SUVOROV, BJM Laboratories Ltd, Or Yehuda, Israel |
| 0209 | Effect of gauge length of single filament tensile strength
L.V.J. LASSILA, and P.K. VALLITTU, University of Turku, Finland |
|