Seq #67 Friday, 15 September 2006

2:00 PM-5:00 PM Trinity College Dublin Hamilton Building Lower Ground I, Poster
A. Dental Materials Poster Session III
 
0550  Different Surface Pretreatment and Composite-to-Quartz Fiber Posts Adhesion
B. DALLARI1, P.N. MASON2, L. ROVATTI3, and A. DALLARI3, 1private practice, Modena, Italy, 2University of Padova, Italy, 3University of Verona, Modena, Italy
0551  Tear strength as indicator for the stability of Alginates
R. WOORTMAN1, C.J. KLEVERLAAN2, D. IPPEL1, and A.J. FEILZER2, 1CAVEX HOLLAND BV, Haarlem, Netherlands, 2Academic Centre for Dentistry Amsterdam, Netherlands
0552  The assessment of restorations made of QuixFil composite material
K. MALKIEWICZ, Warsaw Medical University, Warszawa, Poland, and E. JODKOWSKA, Department of Conservative Dentistry, Medical University of Warsaw, Poland
0553  Marginal and internal fit of Cerec3 ceramic copings
R. HMAIDOUCH1, W.-D. MUELLER2, P. NEUMANN2, and K.-P. LANGE2, 1Humboldt-Universitat, Dental School, Berlin, Germany, 2Humboldt-Universitat, Berlin, Germany
0554  Influence of Carved Surface on Carbon and Quartz Posts Retention
L. ROVATTI1, P.N. MASON2, B. DALLARI3, and A. DALLARI1, 1University of Verona, Modena, Italy, 2University of Padova, Italy, 3private practice, Modena, Italy
0555  Surface Treatments Influence on Shear-bond Strength of Hard Relining
O. ETIENNE, Louis Pasteur University, Dental Faculty, Strasbourg, France, C. TADDEI, Louis Pasteur University, Strasbourg, France, D. ATLANI, INSA, National Institute for Applied Sciences, Strasbourg, France, and H. PELLETIER, INSA, Strasbourg, France
0556  The assessment of restorations made of Sure Fil condensable composite
E. JODKOWSKA, Department of Conservative Dentistry, Medical University of Warsaw, Poland, and K. MALKIEWICZ, Warsaw Medical University, Warszawa, Poland
0557  Evaluation of mixing method on porosity of luting cements
M. HAMMAD1, A. QUALTROUGH1, D.C. WATTS2, and N. SILIKAS1, 1The University of Manchester, School of Dentistry, United Kingdom, 2University of Manchester, School of Dentistry & Photon Science Institute, United Kingdom
0558  Surface Treatments' Effect on Bonding of Luting Cement to Ceramic
H. YURDAGUVEN, P. KURSOGLU, M. SOYMAN, and E. KAZAZOGLU, Yeditepe University, Istanbul, Turkey
0559  Conversion rate of experimental amorphous calcium phosphate/methacrylate composites
Z. TARLE1, D. SKRTIC2, A. KNEZEVIC1, A. MENIGA3, S. MUSIC4, and K. PRSKALO1, 1University of Zagreb, School of Dental Medicine, Croatia, 2American Dental Association Foundation, Gaithersburg, MD, USA, 3University of Zagreb, Private Office, Croatia, 4Rudjer Boskovic Institute, Zagreb, Croatia
0560  Influence of ceramic transparency on curing efficiency of light sources
A. KOCH, M. KRÖGER, I. MANETSBERGER, K.-H. FRIEDL, K.-A. HILLER, and G. SCHMALZ, Zahnerhaltung und Parodontologie, Regensburg, Germany
0561  Direct Pulp Capping with adhesive resins and composite
A. GUIDA, M.R. PECIAROLO, S. LOGHI, and R. DI GIORGIO, University of Rome "la Sapienza", Italy
0562  Proximal Adaptation of Partial Ceramic Crowns with Different Luting Techniques/Materials
M. FEDERLIN, K.-A. HILLER, H. REINHARD, D. FRITZSCH, and G. SCHMALZ, University of Regensburg, Germany
0563  In Vitro Biological Responses of Fibroblast to Blue Light Exposure
K. GRITSCH1, L. POURREYRON2, L. PONSONNET3, C. SCHEMBRI1, C. LAGNEAU1, and B. GROSGOGEAT1, 1Université Lyon 1, Faculté d'Odontologie, France, 2Université Montpellier 1, Faculté d'Odontologie, France, 3Université de Rouen, Laboratoire Polymères Biopolymères Membranes, Mont-Saint-Aignan, France
0564  Measuring Flow of Regular Set Impression Materials Using Oscillating Rheometer
R. PERRY, G. KUGEL, S. STIPOH, and C. MAIOLO, Tufts University, Boston, MA, USA
0565  Preventive Effect of Two Glass-ionomer Cements vs. Two Composite Materials
D. NEGOVETIC VRANIC, K. SKRINJARIC, D. GLAVINA, and I. SKRINJARIC, School of Dental Medicine, University of Zagreb, Croatia
0566  Clinical Comparison of Different Bleaching Systems on Color Changes
E. OKTAY, Hacettepe University, Ankara, Turkey, and S. BOLAY, Hacettepe University, Ankara, Turkey
0567  Fracture strength of endodontically treated teeth restored with FRC posts
D. PAPADOGIANNIS, National and Kapodistrian University of Athens, Greece, and T. PAPADOPOULOS, National and Kapodistrian University of Athens, Greece
0568  Quantitative Tubule Occlusion in an In Vitro Remineralization/Demineralization Model
A.K. BURWELL, NovaMin Technology, Inc, Alachua, FL, USA, and D.C. GREENSPAN, NovaMin Technology, Inc, Alachua, FL, USA
0569  Material Properties of Different (Self-)Adhesive Resin Cements
C.A. WIEDIG, R. HECHT, G. RAIA, and M. LUDSTECK, 3M ESPE AG, Seefeld, Germany
0570  Clinical evaluation of direct class II restorations using fiber-reinforced composite
S. DELIPERI, Tufts University, Cagliari, Italy, D.N. BARDWELL, Tufts University, Boston, MA, USA, and L. SABA, Private practice, Cagliari, Italy
0571  Effectiveness of different polymerization protocols for class II composite restorations
L.C.G. DE JONG1, N.J. OPDAM1, E.M. BRONKHORST1, J.J. ROETERS1, and J.G. WOLKE2, 1Radboud University Nijmegen Medical Centre, Netherlands, 2University of NijmegenRadboud University Nijmegen Medical Center, Netherlands
0572  Development of a Sustained Fluoride Releasing Cement
C.D. MCMURRAY, R. HOBSON, and J. MCCABE, University of Newcastle-upon-Tyne, Newcastle upon Tyne, England
0573  Influence of Polishing Technique on Surface Quality of Ceramic Inlays
D. GLAVINA1, S. MAHOVIC2, T. SKRINJARIC1, and I. SKRINJARIC1, 1School of Dental Medicine, University of Zagreb, Croatia, 2Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, Croatia
0574  Clinical evaluation of the composite fillings with the inserts
K. GONCZOWSKI, Jagiellonian University, Medical Faculty, Institute of Dentistry, Krakow, Poland
0575  Occlusal Wear of a Resin-modified Nano-Ionomer in vitro
M.R. PINTADO1, A. VERSLUIS2, R. DELONG3, and W. DOUGLAS1, 1University of Minnesota School of Dentistry, Minnesota Dental Research Center for Biomaterials and Biomechanics, Minneapolis, USA, 2University of Minnesota School of Dentistry, Minnesota Reseach Center for Bimaterials and Biomechanics, Minneapolis, USA, 3University of Minnesota School of Dentistry, Minnesota Research Center for Biomaterials and Biomechanics, Minneapolis, USA
0576  Laser Pretreatment of a Zirconium-oxide Ceramic Core Material
S. OBRADOVIC, H. MEYER TVINNEREIM, and R. EIDE, University of Bergen, Faculty of Dentistry, Norway
0577  Incidence of Temperature on Fluoride Exchanges in Glass ionomer Cements
C. VILLAT1, N.M. PRADELLE-PLASSE2, P. PONTHIAUX3, F. WENGER3, and P. COLON4, 1Ecole Centrale de Paris, Faculté de Chirurgie Dentaire Lyon 1, Châtenay-Malabry, France, 2Faculté de Chirurgie Dentaire Paris 7, Antony, France, 3Ecole Centrale de Paris, Châtenay-Malabry, France, 4Faculté d'Odontologie de Paris VII, France
0578  Spectrophotometric Shade Determination for Posterior Pfm Restorations
G. FANI, A. VICHI, and E. BERTELLI, University of Siena, Firenze, Italy
0579  Increased Fracture Toughness of Glass Ionomer Cement containing P.O.S.S. particles
P. MURRAY, Queen's University of Belfast, United Kingdom, J.F. ORR, Queen's University Belfast, United Kingdom, and C. MITCHELL, Queen's University of Belfast -, Northern Ireland, Uk
0580  Efficacy of a Novel, Non-tray, Paint-on Whitening Gel
E. AL MACHOT, University of Technology, Dresden, Conservative Dentistry in Carl Gustav Carus clinic, Germany, and T. HOFFMANN, Dresden University of Technology, Department of Periodontology in Carl Gustav Carus Clinic, Germany
0581  The mechanical properties of porcelain fused to metal veneering ceramics
P. LAMBRIANOU, S. POLLINGTON, and R. VAN NOORT, University of Sheffield, United Kingdom
0582  Clinical Evaluation of Fiber-reinforced Composite Bridges: Two-year Report
J. PORTUGAL, M.F. BERNARDO, C. PEREIRA, A.V. TAVARES, and J. LEITÃO, Faculdade de Medicina Dentária da Universidade de Lisboa, Lisbon, Portugal
0583  Effect of thermocycling on the mechanical properties of soft liners
M.M. MUTLUAY1, S. OGUZ2, A. DOGAN2, and B. BEK3, 1University of Oslo, Norway, 2Gazi Universitesi, Ankara, Turkey, 3Cumhuriyet Universitesi, Sivas, Turkey
0584  Obturation quality using a preloade plastic carrier
L. STEIER, Spezialist fur Prothetik der DGZPW, Mayen, Germany, E. LYNCH, Queens University Belfast, Northern Ireland, Uk, and R. BEER, University of Witten/Herdecke, Germany
0585  Workability and Mechanical Performance of an MTA-like Root Filling Cement
M.P. HOFMANN, K.S. COOMARASWAMY, and P.J. LUMLEY, University of Birmingham, School of Dentistry, United Kingdom
0586  Temperature Rise with Curing Methods and Units in Composite Resins
M. HASANI TABATABAI, M. MIRZAI, M. ATAEI, and F. MOTEVASELIAN, Tehran University, Iran
0587  Mechanical characteristics of a new glass ceramic material
A. BEHRENS, G. BERTHOLD, B. BURGER, and H. HAUPTMANN, 3M ESPE, Seefeld, Germany
0588  Flexural properties of radiopaque fiber reinforced root canal posts
P. MÜLLER, R. PEEZ, V. PORSFELD, and P. BRAUN, 3M ESPE AG, Seefeld, Germany
0589  Microhardness and Marginal Adaptation of Pre-warmed Composites
B. ZIMMERLI, C. RICKLI, and A. LUSSI, University of Bern, Switzerland
0590  Comparison of Evaluation-Methods of Cement-Joint Homogeneity of Luting-Materials for Posts
R. WATZKE, Dept. of Dental Prosthodontics and Geriatric Dentistry, Campus Virchow Clinics, Charité - Universitätsmedizin Berlin, Germany, G. STERZENBACH, Humboldt-University Berlin, Germany, and M. NAUMANN, Humboldt-University Berlin, Charite - University Medicine, Germany
0591  Viscoelastic Stability of Resin-Composites Aged in Food-Simulating Solvents
H.Y. MARGHALANI, University of Manchester, School of Dentistry, United Kingdom, and D.C. WATTS, University of Manchester, School of Dentistry & Photon Science Institute, United Kingdom
0592  Effect of cyclic loading on bond strength of fibre posts
K. BEKES, J. KROMBHOLZ, C.R. GERNHARDT, and H.-G. SCHALLER, Martin-Luther-University Halle-Wittenberg, Germany
0593  Light Tip Diameter Effects on Flexural Properties of Resin-Based Composites
G. BHAMRA, University of Dublin, Dublin Dental School and Hospital, Trinity College Dublin, Ireland, and G.J. FLEMING, University of Dublin, Ireland
0594  Bone Response to a Novel Porous PLLA Scaffold
C. FREEMAN1, E. BAAS2, Y. YANG2, M. WOOD2, I. BROOK1, and A. EL-HAJ2, 1University of Sheffield -, England, Uk, 2University of Keele, United Kingdom
0595  Influence of N-acetylcysteine on HEMA-induced cytotoxicity and genotoxicity
H. SCHWEIKL1, K.-A. HILLER1, G. SPAGNUOLO2, and G. SCHMALZ1, 1University of Regensburg, Dental School, Germany, 2University of Naples, Napoli, Italy
0596  The Effect of Dentin Adhesives on ROS Production and Cytotoxicity
M. DEMIRCI1, G. SCHMALZ2, K.-A. HILLER2, C. BOSL2, and H. SCHWEIKL2, 1University of Istanbul, Faculty of dentistry, Turkey, 2University of Regensburg, Germany
0597  HEMA effect on ERK and PI3K/AKT survival pathways in HPC
G. SPAGNUOLO1, V. D'ANTÒ1, H. SCHWEIKL2, R. VALLETTA1, G. SCHMALZ2, R. MARTINA1, and S. RENGO1, 1University of Naples "Federico II", Napoli, Italy, 2University of Regensburg, Germany
0598  Cytotoxicity of Dental Adhesives on Established Cell Lines
E. KOULAOUZIDOU, M. HELVATJOGLU-ANTONIADES, G. PALAGHIAS, A. KARANIKA-KOUMA, and D. ANTONIADES, Faculty of Dentistry, Aristotle University Thessaloniki, Greece
0599  The Investigation Self-Etch Bonding Agents Biocompatibility with Inflammation Factors
Y.O. ZORBA, Ataturk University, Dentistry Faculty, Erzurum, Turkey, and M. YILDIZ, Ataturk Universitesi, Erzurum, Turkey

Back to the: Scientific Groups Program

Back to the IADR Pan European Federation 2006 (September 13-16, 2006)

Top Level Search