| | |
| 0003 | Root Canal Dentin Treatment with Self-Etching Adhesives: SEM Study
A. DALLARI1, P.N. MASON2, L. ROVATTI1, and B. DALLARI3, 1University of Verona, Modena, Italy, 2University of Padova, Italy, 3private practice, Modena, Italy |
| 0004 | Compressive Failure of All-Ceramic Crowns Luted with Four Different Cements
M.L. GOOD, J.F. ORR, and C. MITCHELL, Queen's University Belfast, United Kingdom |
| 0005 | Comparison of marginal adaptation of two dental composites
L. FORNER, Universidad de Valencia, Spain, A. LUZI, Universidad de Valencia, Facultad de Medicina y Odontologia, Spain, and M.C. LLENA, CEU- Universidad Cardenal Herrera, Valencia, Spain |
| 0006 | Marginal integrity of Class V restorations: SEM versus dye penetration
C.-P. ERNST1, P. GALLER1, J.G. HORN1, B. WILLERSHAUSEN1, and B. HALLER2, 1Johannes Gutenberg-University Mainz, Germany, 2University of Ulm, Germany |
| 0007 | Preventive microlaekage in indirect restorations: 48 months follow-up
M.R. PECIAROLO1, A. GUIDA2, S. LOGHI3, and D. NICOSIA1, 1Università degli Studi " La Sapienza" di Roma, Rome, Italy, 2Università degli Studi, Rome, Italy, 3Università degli Studi "La Sapienza" di Roma, Rome |
| 0008 | Microleakage Evaluation of Glass-ionomer Fillings Depending on Methods of Condensation
P. KUSTRA1, J. ZARZECKA2, A. REMBIASZ3, B. PULYK3, and G. ZNOJ3, 1Jagiellonian University, Collegium Medicum, Dental Institute, Cracow, Poland, 2Jagiellonian University, Collegium Medicum, Dental Institue, Cracow, Poland, 3Jagiellonian University, Cracow, Poland |
| 0009 | Effect of light-aging on silicone-resin bond strength in maxillofacial prosthesis
G. POLYZOIS, Dental School,University of Athens, Greece, T. PAPADOPOULOS, University of Athens, Greece, and A. PANTOPOULOS, National and Kapodistrian University of Athens, Greece |
| 0010 | Firing Procedures Influence Flexural Strength of a Zirconia Ceramic
M. ØILO, N.R. GJERDET, and H.M. TVINNEREIM, University of Bergen, Norway |
| 0011 | New Artificial Fissure Model for Sealer Evaluation by Dye-Penetration
T. SALZER1, C. HEIDEGGER2, J. ZIMMERMANN1, and U. SALZ3, 1Ivoclar Vivadent AG, Schaan, Liechtenstein, 2Ivoclar Vivadent, Schaan, Liechtenstein, 3IVOCLAR AG, Schaan Furstentum, Liechtenstein |
| 0012 | Bond Strength of Veneering Resin to Alloy Using Four Adhesives=
A. SARAFIANOU, I. SEIMENIS, and T. PAPADOPOULOS, University of Athens, Greece |
| 0013 | Different yttrium stabilized zirconium-oxide core ceramics have different element contents
R. EIDE1, H.M. TVINNEREIM1, and P.J. HÖL2, 1University of Bergen, Norway, 2Innovest, Bergen, Norway |
| 0014 | Bond Strength of Fiber Post Treated by Cojet System
N. CHELEUX1, C. CAZALAS1, and P. SHARROCK2, 1Faculte de Chirurgie Dentaire, Universite Paul Sabatier, Toulouse, France, 2Laboratoire de chimie bio-inorganique, Universite Paul Sabatier, Toulouse, France |
| 0015 | Bond strength of different adhesive systems to dental hard tissues
A.R. YAZICI1, Ç. ÇELIK2, G. ÖZGÜNALTAY1, and B. DAYANGAÇ1, 1Hacettepe University, Faculty of Dentistry, Ankara, Turkey, 2Baskent University, Faculty of Dentistry, Ankara, Turkey |
| 0016 | Influence of Silane on Bond Strength of Fiber Post
N. CHELEUX1, C. CAZALAS1, and P. SHARROCK2, 1Faculte de Chirurgie Dentaire, Universite Paul Sabatier, Toulouse, France, 2Laboratoire de chimie bio-inorganique, Universite Paul Sabatier, Toulouse, France |
| 0017 | The Optimum Luting Cement and Surface Pre-treatment Combination for Lava
D.P. SENYILMAZ, University of Birmingham, The School of Dentistry, United Kingdom, W. PALIN, University of Birmingham, England, Uk, A. SHORTALL, University of Birmingham -, England, Uk, and F.J.T. BURKE, University of Birmingham, United Kingdom |
| 0018 | Resin-dentin bonds resistance to degradation of an acetone-based one-step adhesive
J.P. PROENÇA1, F. MONTICELLI2, R. OSORIO1, and M. TOLEDANO3, 1University of Granada, Spain, 2University of Siena, Italy, 3University of Granada, Spain |
| 0019 | Influence of Ceramics on the Polymerization Depth of Resin Cements
M.A. KILICARSLAN, The Ministry of Health of Turkey, 75th Year Ankara Dental Hospital, Turkey, A. ZAIMOGLU, Ankara University, Turkey, and H. HASKAN, Haydarpasa Gulhane Military Medical Academy, Istanbul, Turkey |
| 0020 | Effects of ascorbic acid on resin-dentin bonds resistance to degradation
M.C. ERHARDT, R. OSORIO, C. VISERAS, and M. TOLEDANO, University of Granada, Spain |
| 0021 | Bond strength and thermal relaxation of 3Y-TZP and dental porcelains
K. KVAM1, J.E. TIBBALLS1, and T. KOSMAC2, 1Nordic Institute of Dental Materials NIOM, Haslum, Norway, 2Institute Josef Stefan, Ljubljana, Slovenia |
| 0022 | Components of Dentin Bondings Effect Host Cells and Microorganisms
W. PFISTER, J. WIEGAND, R. GÖBEL, I.-M. HERRMANN, and S. EICK, University Hospital of Jena, Germany |
| 0023 | The Wear Behaviour of Posterior Glass-Ionomer Restoratives
A.H. DOWLING, University of Dublin, Dublin Dental School & Hospital, Trinity College Dublin, Ireland, and G.J. FLEMING, University of Dublin, Ireland |
| 0024 | RealSeal Infiltration of Dentinal Tubules: a Confocal Microscopic Study
D.V. PATEL1, M. SHERRIFF1, T. PITT FORD2, T.F. WATSON1, and F. MANNOCCI3, 1King's College London, United Kingdom, 2GKT Dental Institute, Kings College London, United Kingdom, 3Guy's Hospital, London, United Kingdom |
| 0025 | Influence of PMnEDM Homologs on Composite to Metal Bond Strength
T.W. KUPKA1, M. TANASIEWICZ1, M. GIBAS2, W. MALEC3, and A. DABROWSKA2, 1Medical University of Silesia, Bytom, Poland, 2Technological University of Silesia, Gliwice, Poland, 3Institute of Non-Ferrous Metals, Gliwice, Poland |
| 0026 | Temperature Rise during Resin Polymerization with Various Light-Curing Sources
P. DIONYSOPOULOS, E. KOLINIOTOU- KOUMPIA, D. DIONYSOPOULOS, and N. KOTSANOS, Aristotle University of Thessaloniki, School of Dentistry, Greece |
| 0027 | Self-etching Primers Adhesion to Dentin after Chemomechanical Treatment
A.C. AZUL1, S.A. OLIVEIRA2, J. PORTUGAL2, V.J. FAUS3, and J. LEITÃO2, 1Instituto Superior de Ciências da Saúde Egas Moniz, Faculdade de Medicina Dentária da Universidade de Lisboa, Lisbon, Portugal, 2Faculdade de Medicina Dentária da Universidade de Lisboa, Lisbon, Portugal, 3Facultad de Medicina y Odontología - Universidad de Valencia, Spain |
| 0028 | Effect of Ultrasound on Fluoride Release from Glass Ionomer
N.K. THANJAL, J. LUO, R.W. BILLINGTON, and G.J. PEARSON, Queen Mary University of London, United Kingdom |
| 0029 | Fractography of the Adhesive Interface of Three Dentine Bonding Agents
R. VAN NOORT, University of Sheffield, sheffield, England, and N. BETAMAR, University of Sheffield, United Kingdom |
| 0030 | Shear Bond Strength of Veneering Composite to Zirconium-Oxide Ceramic
P. HAHN1, A. KABEL1, and U. WENNEMANN2, 1Albert-Ludwigs-University, Freiburg, Germany, 2Dental Laboratory, Umkirch, Germany |
| 0031 | Effect of Unsintered and Sintered Zirconia Surface Conditioning on Shear-Bond-Strength
T.T. HEIKKINEN, L.V.J. LASSILA, J.P. MATINLINNA, and P.K. VALLITTU, University of Turku, Finland |
| 0032 | Adhesion to affected dentin after enzymatic caries removal
T. LUCHTERHANDT1, O. KAPPLER1, M. HANSEN1, M. URBAN1, R.C. RANDALL2, and R. GUGGENBERGER1, 13M ESPE AG, Seefeld, Germany, 23M ESPE Dental Products, St. Paul, MN, USA |
| 0033 | Effect of 2% chlorhexidine on Bond Strength of Tooth-Coloured Restorations
U. CANDAN, N.K. ERSIN, A. AYKUT, and C. ERONAT, Ege Universitesi, Faculty of Dentistry, Izmir, Turkey |
| 0034 | The Influence of Light-Curing on Microhardness of Pink-Coloured Glass-Ionomer Cement
B. CZARNECKA1, P. DEREGOWSKA-NOSOWICZ1, E. PASZYNSKA1, M. PRYLINSKI2, and H. SHAW2, 1University of Medical Sciences in Poznan, Poland, 2University of Medical Sciences in Poznañ, Poland |
| 0035 | Resin-dentin bonding of self-etch adhesives: effects of simulated pulpal pressure
R. OSORIO, J.P. PROENÇA, F.S. AGUILERA, and M. TOLEDANO, University of Granada, Spain |
| 0036 | Effect of Surface Modifications on Titanium- Ceramic Flexural Bond Strength
A.R. BIBARS, Queen's University of Belfast, United Kingdom, and J.L. CUNNINGHAM, Queen's University of Belfast, United Kingdom |
| 0037 | Minimal curing time for optimal hardness of luting composites
N. ILIE, Universitatsklinik fur Zahn-, Mund-und Kieferheilkunde, Ludwig-Maximilians Universität, Munich, Germany, and R. HICKEL, Universitatsklinik fur Zahn-, Mund-und Kieferheilkunde, Munich, Germany |
| 0038 | Influence of Corrosive Environments on Microleakage of Adhesive Systems
A. KALABISOVA, P. BRADNA, M. DUDEK, and D. HOUSOVA, Institute of Dental Research - 1st. Fac. of Med, Prague 2, Czech Republic |
| 0039 | Evaluation of Polymerisation Shrinkage Effect on the Adhesive-Interface Integrity
S. KELLOW1, M. HELVATJOGLU-ANTONIADES2, F. MANNOCCI1, P. PILECKI1, M. SHERRIFF1, and T.F. WATSON1, 1Guy's King's & St. Thomas' Dental Institute, King's College London, United Kingdom, 2Aristotle University of Thessaloniki, Greece |
| 0040 | The Effect of Different Environments on Dentin Bond Strength
P. BRADNA, M. DUDEK, A. KALABISOVA, and R. VRBOVA, General Faculty Hospital in Prague, Prague 2, Czech Republic |
| 0041 | Confocal Microscopic Determination of Microtensile Failure Patterns of Dental Adhesives
P. PILECKI, S. KELLOW, F. MANNOCCI, M. SHERRIFF, and T.F. WATSON, Guy's King's & St. Thomas' Dental Institute, King's College London, United Kingdom |
| 0042 | Novel Fluorrichterite Compositions for Implantology and Maxillofacial Surgery
M. MIRSANEH1, I.M. REANEY1, I.M. BROOK2, S. BHAKTA3, R. VAN NOORT3, and P.V. HATTON3, 1Department of Engineering Materials, University of Sheffield, United Kingdom, 2Department of Oral and Maxillofacial Surgery, University of Sheffield, United Kingdom, 3Department of Adult Dental Care, University of Sheffield, United Kingdom |
| 0043 | Challenging Resin-Dentin Bonds in Two Storage Media
M. TOLEDANO1, R. OSORIO1, E. OSORIO1, F.S. AGUILERA1, M. YAMAUTI2, D.H. PASHLEY3, and F.R. TAY3, 1University of Granada, Spain, 2Tokyo Medical & Dental University, Japan, 3Medical College of Georgia, School of Dentistry, Augusta, USA |
| 0044 | Bond Strength of Orthodontic Brackets to Composite Restorative Materials
P. DEREGOWSKA-NOSOWICZ1, B. CZARNECKA1, E. KACZMAREK2, E. PASZYNSKA1, and H. SHAW2, 1University of Medical Sciences in Poznan, Poland, 2University of Medical Sciences in Poznañ, Poland |
| 0045 | In vitro challenge and shortening etching time on primary dentin
P.R. OTERO1, F.S. AGUILERA2, R. OSORIO2, M. ROMERO1, and M. TOLEDANO2, 1University Rey Juan Carlos I, Alcorcón (Madrid), Spain, 2University of Granada, Spain |
| 0046 | Sealing Ability of a New Resin-Based Root Canal Obturation System
E.O. ÖNAY1, M. ÜNGÖR1, and H. ORUÇOGLU2, 1Baskent University, Ankara, Turkey, 2Selcuk University, Konya, Turkey |
| 0047 | The effect of ultrasound on the setting behaviour of GICs
J. LUO, A. TALAL, R.W. BILLINGTON, and G.J. PEARSON, Queen Mary University of London, United Kingdom |
| 0048 | Microtensile Strength of Composite Reinforced with IPN and Cross-Linked Posts
F. MANNOCCI1, E. MACHMOURIDOU1, M. SHERRIFF1, T. PITT FORD2, T.F. WATSON1, and P. PILECKI3, 1King's College London, United Kingdom, 2GKT Dental Institute, Kings College London, United Kingdom, 3King's College London Dental Institute, United Kingdom |
| 0049 | Fracture resistance of MOD restorations with an intermediate FRC layer
A. TEZVERGIL-MUTLUAY, L. LASSILA, and P. VALLITTU, Institute of Dentistry, Turku University, Finland |
| 0050 | Biaxial Flexural Strength and Fatigue Life of Two Y-TZP Ceramics
P. PITTAYACHAWAN1, A. MCDONALD2, and J. KNOWLES2, 1Eastman Dental Institute, UCL, London, United Kingdom, 2University College London, United Kingdom |
| 0051 | Adhesion of Core Build-Up Materials to RelyX Fiber Post
R. PEEZ, V. PORSFELD, B. LACHERMEIER, and P. BRAUN, 3M ESPE AG, Seefeld, Germany |
| 0052 | pH AND SOLVENT EFFECTS ON BONDING Bis-GMA RESIN ONTO TITANIUM
M. PUSKA1, J. MATINLINNA1, L. LASSILA1, J. SEPPÄLÄ2, and P. VALLITTU1, 1University of Turku, Institute of Dentistry, Finland, 2Helsinki University of Technology, Department of Chemical Technology, Espoo, Finland |
| 0053 | Polymerization contraction sliding effects on µTBS in dentin
E. CABRERA, Universidad Complutense, Madrid, Spain, and J.C. DE LA MACORRA, Universidad Complutense, Madrid, Spain |
| 0054 | Cyclic Loading Effect on Bonding of Fiber Posts to Root-Dentin
A. ALBALADEJO1, M. TOLEDANO2, R. OSORIO2, and F.S. AGUILERA2, 1University of Salamanca, Spain, 2University of Granada, Spain |
| 0055 | Curing Efficiency of All-in-one Adhesives
M. GAINTANTZOPOULOU1, M. CHAKMAKCHI1, and G. ELIADES2, 1University of Athens, School of Dentistry, Greece, 2University of Athens, Kifissia/Athens, Greece |
| 0056 | Hybrid Layer Investigation of New One-component Self-etch Adhesives by CLSM
U. SALZ, A. MÜCKE, and J. ZIMMERMANN, IVOCLAR AG, Schaan Furstentum, Liechtenstein |
| 0057 | Substitution of HEMA by Bis-Methacrylamide in the Formulation of Adhesives
A. GIANASMIDIS, A. BROT, A. MUECKE, N. MOSZNER, V. RHEINBERGER, and J.-F. ROULET, IvoclarVivadent AG, Liechtenstein, Switzerland |
| 0058 | Microtensile bond strengths of two different dentin bonding agents
M.R. PECIAROLO1, A. GUIDA1, D. NICOSIA2, and S. LOGHI1, 1University of Rome "la Sapienza", Italy, 2University of Rome, Italy |
| 0059 | Testing of amalgam restorations in model teeth
A.S.L. FOK, A. QUALTROUGH, and W.J. MCGREGOR, University of Manchester, United Kingdom |
| 0060 | Bond Strength of Veneering Resin to Alloy Using Four Adhesives
A. SARAFIANOU, I. SEIMENIS, and T. PAPADOPOULOS, University of Athens, Greece |
| 0061 | Effects of saliva contamination on microleakage of different adhesive systems
A.R. YAZICI1, D. KAYAOGLU1, B. DAYANGAÇ1, G. ÖZGÜNALTAY1, and A. ÖNEN2, 1Hacettepe University, Faculty of Dentistry, Ankara, Turkey, 2Hacettepe University, Ankara, Turkey |
| 0062 | Factors Affecting the Adhesive Cementation of Indirect Restorations
N. CHIEFFI1, S. CHERSONI2, F. PAPACCHINI1, M. VANO3, C. GORACCI1, E. MAGNI1, C.L. DAVIDSON4, F.R. TAY5, and M. FERRARI1, 1University of Siena, Italy, 2University of Bologna, bologna, Italy, 3University of Siena, University of Pisa, Italy, 4University of Siena, Amsterdam, Netherlands, 5Medical College of Georgia, School of Dentistry, Augusta, USA |
| 0063 | In vivo Microleakage Around Amalgam and Composite Restorations
T. ALPTEKIN, Oral and Dental Health Care Center, -, Konya, Turkey, F. ÖZER, Selcuk University, Faculty of Dentistry, Konya, Turkey, and N. UNLU, Selcuk University, Konya, Turkey |
| 0064 | Effect of BAG on dentin bonding with a self-etching resin
R. LINDÉN1, A. TEZVERGIL2, L. LASSILA2, and P.K. VALLITTU2, 1Universtity of Turku, Department of Prosthetic Dentistry and Biomaterials Science, Finland, 2Universtity of Turku, Finland |
| 0065 | Bond strength of self-adhesive resin cements used for onlays luting
O. RAFFAELLI, C. GORACCI, A. CANTORO, F. PAPACCHINI, and M. FERRARI, University of Siena, Italy |
| 0066 | Effect of Water on Polymerization of Dentin Bonding Resin
N. QUARTEY-PAPAFIO1, A. ESKANDARIZADEH2, H.Y. MARGHALANI1, N. SILIKAS1, and D.C. WATTS3, 1University of Manchester, School of Dentistry, United Kingdom, 2Kerman University of Medical Sciences, Iran, 3University of Manchester, School of Dentistry & Photon Science Institute, United Kingdom |
| 0067 | Adhesion of RelyX Unicem Aplicap on RelyX Fiber Post
E.-M. POPP, R. PEEZ, V. PORSFELD, and B. LACHERMEIER, 3M ESPE AG, Seefeld, Germany |
| 0068 | Adhesion of various adhesive resin cements to RelyX Fiber Post
V. PORSFELD, R. PEEZ, and B. LACHERMEIER, 3M ESPE AG, Seefeld, Germany |
| 0069 | Influence of operator variability on microlekage of current adhesive systems
A.R. YAZICI1, E. CIBLAK1, G. ÖZGÜNALTAY1, B. DAYANGAÇ1, and E. KARABULUT2, 1Hacettepe University, Faculty of Dentistry, Ankara, Turkey, 2Hacettepe University, Faculty of Medicine, Ankara, Turkey |
|