Additional Polimerization on the Module of Elasticity
S.G. LAUDA, R.C. DA SILVA, H. OSHIMA, E. MOTA, and A. PIRES, Universidade Lut. Brasileira, Canoas, Brazil |
Analyses of the flexural strength between direct and indirect resins
F.M. MILAN, G.V. MUNDSTOCK, J.C. MÜLLER, C.S. SPERANDIO, and S.S. WIESEL, Universidade de Santa Cruz do Sul, Brazil |
Biocompatibility Evaluation of Bioceramic and Biodegradable Polymers Composites
A.L. PATARO1, M.E. CORTES1, L.L. WYKROTA2, K.I.R. TEIXEIRA1, R.M.D.M. TURCHETTI-MAIA1, M.T.P. LOPES1, M.F. OLIVEIRA1, and R.D. SINISTERRA1, 1Universidade Federal de Minas Gerais, Belo Horizonte, Brazil, 2Instituto Brasileiro de Biomateriais, Belo Horizonte, Brazil |
Bond strength of relined denture base resins after water storage
J. GONÇALVES, C.E. VERGANI, R.S. SEÓ, J.M.S.N. REIS, A.L. MACHADO, and A.C. PAVARINA, Universidade Estadual Paulista "Júlio de Mesquita Filho", Araraquara, Brazil |
Composites: Comparison of Compressive Strength
M. MOSCHETTI1, G. BERTOJA1, L.A.G. PIRES1, E. MOTA2, and H. OSHIMA1, 1Universidade Luterana do Brasil, Porto Alegre, Brazil, 2Universidade Luterana do Brasil, Canoas, Brazil |
Depth of Cure and Efectiveness of Curing Light Apparatus (ISO)
M.J. BERNARDES, S.J. MAURO, R.H. SUNDFELD, S.R. MESTRENER, and A.L.F. BRISO, Faculdade de Odontologia de Araçatuba - UNESP, Brazil |
Dimensional stability of acrylic resins after dry or water storage
L.E.C. PEREZ, J.M.S.N. REIS, É.G. JORGE, R.F. SOUZA, and C.A.S. CRUZ, Universidade Estadual Paulista "Júlio de Mesquita Filho", Araraquara, Brazil |
Dimensional Stability of Condensation Silicon Immersed in Disinfectant Solution
S.M.L. MOREIRA-DA-SILVA1, M.C.G. SALVADOR2, and M.J.F. BINDO1, 1Federal University of Paraná, Positivo Universitary Center, Curitiba-PR, Brazil, 2São Paulo University, Bauru-SP, Brazil |
Dual-Resinous-Cement: Post Type vs Depth of Polymerization
A.G. VERÍSSIMO1, M.S. MENEZES2, R.B. FONSECA2, L.C. SOBRINHO3, and C.J. SOARES2, 1Federal University of Uberlândia, Uberlândia-MG, Brazil, 2Federal University of Uberlândia, Brazil, 3State University of Campinas, Piracicaba - SP, Brazil |
Effect of a microwave cycle on properties of acrylic resins
C.V. MACHADO, B. SALVADOR, R. MARTINS, F. OGLIARI, C.B.B. FORTES, S.M.W. SAMUEL, V. STEFANI, and C. PETZHOLD, Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil |
Effect of LEDs Exposure Time on Curing Depth of Composite
C.T. MACHADO1, A.J.S. SANTOS1, K.C. LIMA2, S.T. PORTO NETO3, and A.B.L. NASCIMENTO4, 1Potiguar University, Natal, Brazil, 2UFRN University, Natal-RN, Brazil, 3UNESP University, Araraquara, Brazil, 4Pernambuco University, Camaragibe, Recife, Brazil |
Effect of microwave irradiation on properties of an acrylic resin
L.P.F. FERREIRA, J.G.R. RIBEIRO, R.F. SOUZA, J.C.M. SEGALLA, and M.A. COMPAGNONI, Universidade Est. Paulista Julio Mesquita, Araraquara, Brazil |
Effect of surface-treatments of fibers-posts on the-bonding to resin-cement
F.R. SANTANA, G.Á. SANTOS, J.C. PEREIRA, M.S. MENEZES, and C.J. SOARES, Federal University of Uberlândia, Uberlândia-MG, Brazil |
Effects of bleaching agents on surface roughness of different substrats
J.L. MARIMON, Sr., F. CARDOZO, Sr., A. STRAPASSON, G. CAMACHO, and M. BUENO, Universidade Federal de Pelotas -RS -Brazil, Faculdade de Odontologia, Brazil |
Evaluation of Superficial Micro hardness of two Composite Resins
C.C. BRAGANHOLLO1, H.A. SILVA2, O.M.M. GOMES2, J.C. GOMES2, G. GOMES2, and F.A. SANTOS2, 1Universidade Estadual de Ponta Grossa, Brazil, 2Universidade Estadual de Ponta Grossa, Curitiba, Brazil |
Evaluation of the light transmitting glass fiber pre-fabricated post
|
Fatigue limit of relined denture base resins after water storage
A.C. SILVA, C.E. VERGANI, J.M.S.N. REIS, R.S. SEÓ, and A.C. PAVARINA, Universidade Estadual Paulista "Júlio de Mesquita Filho", Araraquara, Brazil |
Flexural strength and hardness of acrylic resin reinforced with fibers
M. MAZZA MARTINEZ MARQUES, L.M.G. FAIS, L.A.P. PINELLI, R.H.B. TAVARES DA SILVA, and L.G. VAZ, Universidade Est. Paulista Julio Mesquita, Araraquara, Brazil |
Flexural strength and roughness of four composite resins
C.D.A. AGUIAR, R.S. SILVA, T. DONASSOLO, F. DEMARCO, and Á. DELLA-BONNA, Univ. Federal De Pelotas, MT, Brazil |
Flexural strength of relined denture base resin after water storage
J.M.S.N. REIS, C.E. VERGANI, A.L. MACHADO, A.C. PAVARINA, and E.T. GIAMPAOLO, Universidade Estadual Paulista "Julio de Mesquita Filho", Araraquara, Brazil |
Fracture resistance of adhesive fixed partial dentures: effect of fiber-reinforcement
M.B. RANGEL, Federal University of Uberlandia, Brazil, A.J. FERNANDES-NETO, Federal University of Uberlandia, Uberlandia, Minas Gerais, Brazil, R.B. FONSECA, Federal University of Uberlândia, Brazil, and C.J. SOARES, Federal University of Uberlandia, Uberlândia, Brazil |
Fracture Resistance of Bovine and Human Teeth with Different Posts
M.S. MENEZES, E.C. QUEIROZ, A.G. VERÍSSIMO, J.C.G. BIFFI, and C.J. SOARES, Federal University of Uberlândia, Uberlândia-MG, Brazil |
Influece of the Glass-Fiber-Post Relining on Polymerization Degree of Dual-Resinous-Cement
G.C. ARAÚJO-FILHO, M.S. MENEZES, R.B. FONSECA, and C.J. SOARES, Federal University of Uberlândia, Uberlândia-MG, Brazil |
Influence of cavity-preperation-type and use post-systems on-fracture-resistance of the endodontically-treated-premolars
R.R. GIL, Federal University of Uberlandia, Uberlândia, Minas Gerais, Brazil, P.V. SOARES, Federal University of Uberlandia, Uberlandia, Minas Ge, Brazil, P.C. SIMAMOTO JÚNIOR, Universidade Federal de Uberlandia, P.S. QUAGLIATTO, Universidade de Uberlandia / Fac De Odont Da, Uberlandia, MG, Brazil, and C.J. SOARES, Federal University of Uberlandia, Uberlândia, Brazil |
LED Curing Unit Effectiveness in a Composite Polymerization
C.O. JUCHEM1, U. CAMPREGHER2, G.B. FRACARO1, A. CORREA2, and S. SAMUEL2, 1Universidade Federal do Rio Grande do Sul, Faculdade de Odontologia, Porto Alegre, Brazil, 2Universidade Federal do Rio Grande do Sul, Porto Alegre, Brazil |
Microhardness evaluation of composite resins cured with different light sources
J.C. CICCONE, W.C. SOUZA-ZARONI, M.A. CHINELATTI, and R.G. PALMA-DIBB, Universidade de São Paulo, Ribeirão Preto, Brazil |
Polimerization efficiency of resins materials using two ligth-curing units
K.R.C. DIAS, Sr., Universidade do Estado do Rio de Janeiro, Universidade Federal do Rio de Janeiro, Brazil |
Relationship between experimental methods: stress-distribution, fracture-strength, fracture-modes
R.B. FONSECA1, L. CORRER-SOBRINHO2, C.J. SOARES3, and A.J. FERNANDES NETO1, 1Federal University of Uberlândia, Brazil, 2State University of Campinas, Piracicaba, SP CEP, Brazil, 3Federal University of Uberlandia, Uberlândia, Brazil |
Roughness and topography of resin-based composite: analysis in atomic-force microcopy
P.H. DOS SANTOS1, S. PAVAN2, S. CONSANI3, L. CORRER SOBRINHO3, and M.A.C. SINHORETI4, 1UNESP - São Paulo State University, Araçatuba School of Dentistry, Araçatuba, SP, Brazil, 2São Paulo State University, Araraquara, Brazil, 3Faculdade de Odontologia de Piracicaba (UNICAMP), Brazil, 4FOP - UNICAMP, Piracicaba-SP, Brazil |
Sandblasting with Oxide-of-Aluminum: Influence on the Mechanical Properties of Fiber-Posts
T.S. ARAÚJO1, M.S. MENEZES2, and C.J. SOARES1, 1Federal University of Uberlândia, Uberlândia-MG, Brazil, 2Federal University of Uberlândia, Uberlândia Dental School, Uberlândia-MG, Brazil |
Shear Bond Strength of Porcelain Repair Systems
J.G. SANTOS1, R.G. FONSECA2, G.L. ADABO2, C.A.S. CRUZ2, and L.G. VAZ2, 1Universidade Estadual Paulista - UNESP, Faculdade de Odontologia de Araraquara, Araraquara, Brazil, 2Universidade Estadual Paulista - UNESP, Araraquara, Brazil |
Study of Dimensional Change of a Silicon by Condensation
F.A. SOUZA, R.S. NISHIOKA, R.M. JOIAS, K.T. LANDIM, and D.K. VASCONCELOS, Universidade Est. Paulista Julio Mesquita, Sao Jose dos Campos, Brazil |
Study of flexural resistance of hybrid, microparticles and nanoparticles composites
I.L. SANTANA1, L.E. RODRIGUES FILHO2, S. GERALDELI2, and R.A.F.L. ATUI2, 1Universidade de São Paulo - USP, Universidade Federal do Maranhão - UFMA, Brazil, 2Universidade de São Paulo - USP, Brazil |
Superficial Roughnes of a Composite Resin Bleached with Two Agents
L. COSTA, A. MATTOS, C. MOTTA, E. SANTANA, A. PINHEIRO, C. SOUTO, and R. BEZERRA, Universidade Federal Da Bahia, Salvador, Brazil |
The Influence of the Cavity-Preparation-Design on Indirect-Ceromer-Restorations-Marginal-Adaptation
P.C.F. SANTOS FILHO1, R.B. FONSECA1, A.J. FERNANDES NETO1, L. CORRER-SOBRINHO2, and C.J. SOARES1, 1Federal University of Uberlândia, Brazil, 2State University of Campinas, Piracicaba, SP CEP, Brazil |
[Roughness Analysis of Self-cured Acrylic Resins Using Different Polishing Systems]
P.C. MENEGHETTI1, E.B. CARVALHO1, A.F. BANDEIRA1, M. HARLOS1, B.L. SILVEIRA1, A. MALLMANN2, and L.B. JACQUES1, 1Universidade Federal De Santa Maria, Brazil, 2Fundação Bahiana para o Desenvolvimento das Ciências, Salvador, Brazil |