Application methods influence on self-etching adhesive systems enamel bond strength
M. SIVIERO, C.M. RODRIGUES, G.M.G. LIMA, and C.R.G. TORRES, UNESP - Faculdade de Odontologia - Campus de São José dos Campos, Brazil |
Bond Strength After Er:YAG Laser Preparation in Permanent Teeth
J.M. BARROSO1, C.P. TORRES2, R.P. RAMOS2, A.M. QUEIROZ2, R.G.P. DIBB2, J.D. PÉCORA2, and M.C. BORSATTO2, 1Faculdade de Odontologia de Ribeirão Preto/USP, Brazil, 2Faculdade de odontologia de Ribeirão Preto/USP, Brazil |
Bond Strength of Tissues Submitted to a Carbamide Peroxide Dentifrice
B.M.C.G. SILVA, UNIARARAS - Centro Universitário Hermínio Ometto, Araras, Brazil, R.T. BASTING, Centro de Pesquisas Odontológicas São Leopoldo Mandic, Campinas, Brazil, and F.M. FLÓRIO, College of Dentistry, Piracicaba, Brazil |
Class II restorations bond strength after thermal-mechanical cycling
A.N. CAVALCANTI, F.H. MITSUI, G.M. AMBROSANO, and G.M. MARCHI, State University of Campinas, Piracicaba, Brazil |
Composite Resin Repairs Bond Strength Prepared With Different Restorative Combinations
F.R. VOLTARELLI, A.R. PERIS, A.N. CAVALCANTI, F.H.O. MITSUI, and G.M. MARCHI, Faculdade de Odontologia de Piracicaba - UNICAMP, Brazil |
Dentin Shear Bond Strength and Interfacial Analysis of Self-etching Systems
C.S. TEIXEIRA, Federal University of Santa Catarina, School of Dentistry, Florianópolis, Brazil, and M.C. CHAIN, Federal University of Santa Catarina, School of Dentistry, Florianópolis, Brazil |
Effect of Cavity Preparation Techniques on Bond Strength to Dentin
M. GIANNINI, Piracicaba School of Dentistry, University of Campinas, Brazil, and M.T. OLIVEIRA, Piracicaba School of Dentistry, University of Campinas, Brazil |
Effect of Er:YAG laser on bond strength of glass ionomers
F.L.B. AMARAL1, A.E. SOUZA2, R.G. PALMA-DIBB2, J.D. PÉCORA2, and S.A.M. CORONA2, 1University of São Paulo, Ribeirão Preto School of Dentistry, Ribeirão Preto, Brazil, 2University of São Paulo, Ribeirão Preto, Brazil |
Effect of hydrogen peroxide bleaching on the enamel bond strength
A. MARINI1, R.F. MAZUR2, E.C. SOUZA2, and J.B. GODOY-BEZERRA2, 1Pontificia University Catolic of Paraná, Department of Orthodontics and Orthopedics Facial, Curitiba, Brazil, 2Pontificia University Catolic of Paraná, Curitiba, Brazil |
Effect of refrigeration on bond strenght of one self-etching adhesive
J.S. FARIA1, P. CAMILO, Jr.2, G. BORGES2, L.C. SOBRINHO3, and A.M. SPOHR4, 1Universidade de Uberaba, MD, Brazil, 2Universidade de Uberaba, Brazil, 3State University of Campinas, Piracicaba, SP CEP, Brazil, 4Pontifical Catholic University of Rio Grande do Sul, Porto Alegre, Brazil |
Effect of the photoactivation mode on microtensile strenght and microhardness
A.L. SILVA1, L.A. PAULILLO1, C.T. SANTOS2, and G.D. PEREIRA3, 1Universidade Estadual de Campinas, Piracicaba, Brazil, 2Universidade de São Paulo, Piracicaba, Brazil, 3Universidade Gama Filho, Rio de Janeiro, Brazil |
Effect of treatment of dental-substrate associated with the self-etching adhesive
C.G. CASTRO, J.C. PEREIRA, M.S. MENEZES, and C.J. SOARES, Federal University of Uberlandia, Uberlandia, Minas Ge, Brazil |
Effects on Tensile Bond Strength of Brackets after TiF4 Application
L.S. MORAIS1, G.G. SERRA1, and M.M.G. SOUZA2, 1Universidade Federal Do Rio De Janiero, Instituto Militar de Engenharia, Rio de Janeiro, Brazil, 2Universidade Federal Do Rio De Janiero, Rio de Janeiro, Brazil |
Enamel microtensile bond strength obtained with halogen light and LED
M.L. TURBINO, Universidade de Sao Paulo, Brazil, and A.P. CARVALHO, Universidade de Sao Paulo, Brazil |
Evaluation of immediate hybridization on µTBS of indirect composite restorations
C.R.B. FREITAS, São Paulo State University - UNESP, Araraquara - São Paulo, Brazil, and S. DUARTE, São Paulo State University - UNESP, Araraquara - SP, Brazil |
Evaluation of post retention using different cementing techniques
T.S. FONSECA, P.C. SAQUY/PHD, C.B. SOUZA-FILHO, Y.T.C. SILVA-SOUSA/PHD, and M.D. SOUSA-NETO, Universidade de Ribeirão Preto - UNAERP, Brazil |
In Vitro Microleakage at beveled occlusal margins in primary molars
M.Á.P.A. SANTOS1, M. PASSOS2, L.C. MAIA3, and K.R.H.C. DIAS3, 1Universidade Federal do Rio de Janeiro, Brazil, 2Universidade Do Estado do Rio de Janeiro, Brazil, 3Universidade Federal Do Rio De Janiero, Rio de Janeiro, Brazil |
Influence of Er,Cr:YSGG Laser on Bond Strength of Self-Etching System
M.E. OLIVEIRA, University of São Paulo - USP, Institute of Energetic and Nuclear Research, Brazil, N. GUTKNECHT, Aachen Dental Laser Institute, Germany, D.M. ZEZELL, University of Sao Paulo, Instute of Nuclear and Energetic Research, Brazil, C. APEL, University of Aachen, Germany, M.L. TURBINO, Universidade de Sao Paulo, Brazil, A. BLAY, University of Sao Paulo, Brazil, D.T. MENEGUZZO, University of São Paulo - USP, Brazil, and C.D.P. EDUARDO, Universidade de São Paulo, São paulo, Brazil |
Influence of Er:YAG laser irradiation distance on adhesion to enamel
|
Influence of Er:YAG laser on microtensile and in enamel/resin interface
C.S. DELFINO1, J.F. SASSI2, W.C. SOUZA-ZARONI2, J.D. PÉCORA2, and R.G. PALMA-DIBB2, 1USP, Faculdade de Odontologia de Ribeirão Preto, Ribeirão Preto, Brazil, 2USP, Ribeirão Preto, Brazil |
Influence of prophylaxis-method of dentin on adhesion to luting-resin-cement
J.C. PEREIRA1, P.V. SOARES2, G. BORGES3, A.J. FERNADES-NETO2, and C.J. SOARES2, 1Federal University of Uberlandia, Dentistry School, Brazil, 2Federal University of Uberlandia, Brazil, 3Universidade de Uberaba, Brazil |
Interaction effect between self-etching systems and wetting bond technique
|
Irrigant Solutions' Effect on Bond Strength to Pulp Chamber Dentin
J.N. SANTOS, A.A. ZAIA, B.P.F.A. GOMES, F.J. SOUZA-FILHO, and C.C.R. FERRAZ, Faculdade de Odontologia de Piracicaba - UNICAMP, Brazil |
Long term of smear layer incorporation on bond strength
P. JACQUES, University of São Paulo State-UNESP, Araraquara, Brazil, and J. HEBLING, University of Sao Paulo State, Araraquara, Brazil |
Mechanical behavior of composite reinforced by two types of fibers
S.M.M. SPYRIDES, Universidade Federal do Rio de Janeiro, Brazil, and F.L. BASTIAN, Universidade Federal do Rio de Janeiro, Rio de Janeiro - RJ, Brazil |
Microtensile bond strength and gap formation of adhesives to enamel
S.K. MOURA1, A. PELLIZZARO2, K. DEL-BIANCO3, A. REIS2, A.D. LOGUERCIO2, and R.H.M. GRANDE4, 1University of São Paulo USP, Brazil, 2University of Oeste de Santa Catarina, Joaçaba, Brazil, 3UNOESC - ACBS, Joaçaba - SC, Brazil, 4University of São Paulo - USP, Brazil |
Microtensile bond strength and morphological analysis of Er:YAG lased dentine
J.F. SASSI, C.S. DELFINO, W.S. SOUZA-ZARONI, J.D. PECORA, and R.G. PALMA-DIBB, Universidade de São Paulo, Ribeirão Preto, Brazil |
Microtensile bond strength and morphological analysis of self-etching adhesive systems
M. CHINELATTI, J.F. SASSI, S.A.M. CORONA, and R.G. PALMA-DIBB, Universidade de São Paulo, Ribeirão Preto, Brazil |
Microtensile strength and hybrid layer of total-etch and self-etch adhesive
|
Reduced etching time effect on bond strength to primary dentin
M.E. SANABE1, J. HEBLING2, and C.A.S. COSTA2, 1Universidade Est. Paulista Julio Mesquita, Araraquara, Brazil, 2University of São Paulo State, Araraquara Dental School, Brazil |
Shear Bond Strenght after In Situ Bleaching
|
Shear bond strength in several enamel conditions
F.L. ROMANO, M.B.B.A. MAGNANI, L. CORRER SOBRINHO, P.R.A. NOUER, and D.F. NOUER, Faculdade de Odontologia de Piracicaba - Unicamp, Brazil |
Shear vs. Micro-Shear Bond Strength Test: A Finite Element Analysis
E. PLACIDO1, J.B.C. MEIRA2, R.G. LIMA3, and R.Y. BALLESTER2, 1University of São Paulo, School of Dentistry, Brazil, 2University of São Paulo, Brazil, 3University of São Paulo, Polytechnique school, Brazil |
Tensile Bond Strength of a Glass-Infiltrated Ceramic Bonded to Resin
M. BORBA, Universidade de Passo Fundo, Brazil, A. DELLA BONA, Universidade de Passo Fundo, Passo Fundo, RS, Brazil, and G. DIEFENTHAELER, Universidade de Passo Fundo, Passo Fundo-RS, Brazil |
Tensile Bond Strength Self Cured Composite, Light-Cured, Self-Cured Adhesive
A.J. HENKES, Pontificia Un Catolica Rio Grande Do Sul, Faculdade de Odologia, Porto Alegre, Brazil, and J.F.M. PACHECO, Pontificia Un Catolica Rio Grande Do Sul, Faculdade Odontologia, Porto Alegre, Brazil |
Tensile bond strength to ceramic: effect of ceramic surface treatment
T.S. GOIA1, F.P.P. LEITE2, E.T. KIMPARA2, M.A. BOTTINO1, I. BALDUCCI3, and G. SAAVEDRA4, 1São Paulo State University, São José dos Campos, Brazil, 2Universidade Est. Paulista Julio Mesquita, Saô José dos Campos, Brazil, 3Universidade Est. Paulista Julio Mesquita, São José dos Campos, Brazil, 4Universidade Est. Paulista Julio Mesquita, Sao Jose dos Campos, Brazil |
The effects of different ways of storing extracted teeth
L.C.G. JESUS1, E.M.D.O. MARRA2, and H.A. GOMIDE2, 1Universidade Federal de Uberlândia, Faculdade de Odontologia, Brazil, 2Universidade Federal de Uberlândia, Brazil |