| | |
| 2048 | Flexural Strength and Hardness of Direct and Indirect Composites
M. BORBA, Universidade De Passo, Cidade Passo Fund, Brazil, D. CECCHETTI, University of Passo Fundo, Brazil, and A. DELLA BONA, Universidade de Passo Fundo, Brazil |
| 2049 | New Surface Treatment for Polymer of Self Curing Resin
T. KUMAGAI, and Y. SHINOZAKI, GC Corporation, tokyo, Japan |
| 2050 | Effect of filler size on flexural properties of resin composite
Y. TANIMOTO, T. KITAGAWA, M. AIDA, and N. NISHIYAMA, Nihon University School of Dentistry at Matsudo, Matsudo, Chiba, Japan |
| 2051 | Elastic Elongation and Recovery of Impression Materials
N.C. LAWSON, J. BURGESS, and L.C. RAMP, UAB School of Dentistry, Birmingham, AL, USA |
| 2052 | Polymerization Shrinkage and Hardness of New Low-Shrinkage Composites
A. PRESLAN, P. YAMAN, and J.B. DENNISON, University of Michigan, Ann Arbor, USA |
| 2053 | PMMA/MMA-Based Denture Base Material Reinforced with Bamboo Leaf
S. KONDO, Biomass Materials Research, Sapporo Hokkaido, Japan, Y. NODASAKA, Hokkaido University, Sapporo Hokkaido, Japan, and H. SHIMOKOUBE, Meirin College, Niigata, Japan |
| 2054 | Contraction Stress Propagates Crack in Surrounding Ceramic
T. YAMAMOTO1, J.L. FERRACANE2, R.L. SAKAGUCHI2, and Y. MOMOI1, 1Tsurumi University School of Dental Medicine, Yokohama, Japan, 2Oregon Health & Science University, Portland, USA |
| 2055 | Three Dimensional Optical Surface Flow Measurement of Composite Shrinkage
L. ASHER1, D. SHIM1, S. KONDOR2, D.C.N. CHAN1, and J. SITTERLE3, 1Medical College of Georgia, Augusta, USA, 2Georgia Tech Research Institute, Smyrna, USA, 3Georgia Institute of Technology, Atlanta, USA |
| 2056 | Mechanical Properties of a Hydrophilic Cement
R. YIN, D. SHIN, and B. SUH, Bisco, Inc, Schaumburg, IL, USA |
| 2057 | Degree of Conversion of Posterior Composite Resins
D. GAILEY, L. KNOBLOCH, J. BURNS, S. AZER, R. SEGHI, S. AGARWAL, and R. KERBY, The Ohio State University College of Dentistry, Columbus, USA |
| 2058 | Si and Ba Leaching From Composite Resins in Three Media
G. IAZZETTI1, P.B. DUTRA1, R.R. LUIZ1, S.C. JACOB2, and N.K. SARKAR3, 1Federal University of Rio de Janeiro, Brazil, 2FIOCRUZ-INCQS, National Institute of Quality Control in Health, RJ, Brazil, Rio de Janeiro, Brazil, 3Louisiana State University, Baton Rouge, USA |
| 2059 | Physical Properties of an ACP Containing Pit and Fissure Sealant
D. MENIS1, M. KOSSOFF2, H. POZEN3, and T. VAN DEUSEN1, 1Harry J Bosworth Company, Chicago, IL, USA, 2Harry J Bosworth Company, Skokie, IL, USA, 3Harry J. Bosworth Company, Skokie, IL, USA |
| 2060 | Physical Properties of an ACP Containing Orthodontic Adhesive
D. MENIS, Harry J Bosworth Company, Chicago, IL, USA, M. KOSSOFF, Harry J Bosworth Company, Skokie, IL, USA, and H. POZEN, Harry J. Bosworth Company, Skokie, IL, USA |
| 2061 | Microhardness Evaluation of a Translucent Shade Composite Resin
O.M. GOMES1, G.M. GOMES2, A.L. CALIXTO3, and J.C. GOMES1, 1Ponta Grossa State University, Ponta Grossa, Parana, Brazil, 2Ponta Grossa State University, Brazil, 3Ponta Grossa State University |
| 2062 | Calibration of an Artificial Oral Environment with Clinical Data
M.R. PINTADO1, M. LARSON2, R. DELONG3, and W. DOUGLAS3, 1Minnesota Dental Research Center for Biomat & Biomechanics, Minneapolis, USA, 2University of Minnesota, Roseville, USA, 3University of Minnesota, Minneapolis, USA |
|