| | |
| 1336 |
9:00 AM | Comparison of CAD/CAM and CAM Milled Zirconia Bridge Frames
F. BEUER, T. FISCHER, K.-J. ERDELT, H.-U. AGGSTALLER, K. SPIEGL, and W. GERNET, Ludwigs-Maximilians-University, München, Germany |
| 1337 |
9:15 AM | CAD/CAM-manufacturing of FPDs of Alumina and Zirconia by Direct Shaping
R.G. LUTHARDT1, M. JOHANNES2, O. SANDKUHL3, S. QUAAS1, J. LEMCKE4, and H. RUDOLPH2, 1Dresden University of Technology, Germany, 2HITK e.V, Hermsdorf/Thuringia, Germany, 3Inocermic GmbH, Hermsdorf/Thuringia, Germany, 4Ilmcad GmbH, Ilmenau, Germany |
| 1338 |
9:30 AM | Crystalline Phase and Microstructural Changes after Grinding 3Y-TZP Dental Ceramics
I. DENRY, Ohio State University, Columbus, USA, and J.A. HOLLOWAY, Ohio State University, Columbus, USA |
| 1339 |
9:45 AM | Alumina abrasion and grinding effects on yttria-stabilized zirconia ceramic
G.J.P. FLEMING1, A.R. CURTIS1, and P.M. MARQUIS2, 1University of Birmingham, United Kingdom, 2The University of Birmingham, United Kingdom |
| 1340 |
10:00 AM | Influence of veneering on the Fracture strength of All-ceramic Bridges
H.F. KAPPERT1, M. SCHWEIGER2, S. SCHROEDER1, C. WILLE1, and V. RHEINBERGER1, 1Ivoclar Vivadent AG, Schaan Furstentum, Liechtenstein, 2Ivoclar Vivadent, Schaan, Liechtenstein |
| 1341 |
10:15 AM | Critical Wall-Thickness for Adhesively Luted Ceramic Inlays and Partial Crowns
G. SCHMALZ1, M. FRITZSCH1, T. ANTHOFER1, K.-A. HILLER2, and M. FEDERLIN1, 1University of Regensburg, Medical School, Germany, 2University of Regensburg, Germany |
|