| | |
| 3286 | Compressive Strength of Three Different Implant Design Systems
J. PEDROZA, Y. TORREALBA, W. PSOTER, and A. ELIAS, University of Puerto Rico, San Juan, USA |
| 3287 | Influence of Abutment Design on Crestal Bone in Implant-tooth-supported Bridges
C.G. TOH1, C.H. SIAR1, D. SEIZ2, T.B. TAIYEB-ALI1, and S.T. ONG1, 1University of Malaya, Kuala Lumpur, Malaysia, 2Johann Wolfgang Goethe University, Frankfurt, Germany |
| 3288 | Titanium Abutment Surface Roughness and Cement on Crown Retention
J. GODDERIDGE, C.M. STANFORD, and S.-C. TAN, University of Iowa, Iowa City, USA |
| 3289 | Marginal discrepancy and microfiltration in three implant.-abutment fixation systems
J. FERRÉ1, L. GINER1, M. CORTADA1, M. VALIENTE2, and A. PIATTELLI3, 1Universitat Internacional de Catalunya, Sant Cugat del Vallés, Spain, 2Universitat Autónoma de Barcelona, Bellaterra, Spain, 3University of Chieti, Italy |
| 3290 | Effect on retention of implant abutments with different heights
M. SIERRAALTA, J. VIVAS, and M. RAZZOOG, University of Michigan, Ann Arbor, USA |
| 3291 | Influence of abutment design on clinical status of peri-implant tissues
T.B. TAIYEB-ALI1, C.G. TOH1, C.H. SIAR1, D. SEIZ2, and S.T. ONG1, 1University of Malaya, Kuala Lumpur, Malaysia, 2Johann Wolfgang Goethe University, Frankfurt, Germany |
| 3292 | Stress Generation During Torque Application to Implant Abutment Screws
T. KALILI, UCLA School of Dentistry, Los Angeles, CA, USA, and A. CAPUTO, UCLA School of dentistry, Los Angeles, CA, USA |
| 3293 | Precision of Various Mechanical Torque Devices and Torque Settings
K. BRAASCH, S. WOLFART, L. STEINEBRUNNER, and M. KERN, University of Kiel, Germany |
| 3294 | Loosening torques of implant/abutment connective screw systems in vitro
A. BUTKEVICA, D. NATHANSON, and R. POBER, Boston University, MA, USA |
| 3295 | Influence of cantilever forces on the deformation of Implant-Abutment Interface
R. APONTE-WESSON1, A. RANJITKAR2, P. BECK3, J. LEMONS3, M.S. MCCRAKEN3, and W. LACEFIELD3, 1University of Alabama at Birmingham, School of Dentistry, USA, 2University of Alabama, School of Dentistry, Birmingham, USA, 3University of Alabama at Birmingham, USA |
| 3296 | Accuracy of two implant impression splinted techniques: strain-gauge analysis
D.K. VASCONCELLOS, M.A. BOTTINO, F.P.P. LEITE, R.S. NISHIOKA, R.M. JÓIAS, and A.M.M. MESQUITA, São Paulo State University, São José dos Campos, Brazil |
| 3297 | WITHDRAWN
| | 3298 | Effects of Antirotational Design on Peri-implant Bone Stress During Preload
Y.-S. LIN1, M.-S. LEE2, T.-M. WANG1, J.-S. WANG1, and L.-D. LIN1, 1National Taiwan University, Taipei, Taiwan, 2National Taiwan University, Taipei |
| 3299 | Two-year Prospective Follow-up Report on Nobel Biocare Ceramic Abutments
A.-M. HALMOY1, K. MUSTAFA2, E. BERG1, and K. ARVIDSON1, 1University of Bergen, Faculty of Dentistry, Norway, 2Karolinska Institutet, Faculty of Dentistry, Stockholm, Sweden |
| 3300 | The Effect of Restoration Height on the Implant-Abutment Connection
M. SULEIMAN1, R. PALMER2, and R.V. CURTIS1, 1King's College London, Dental Institute, United Kingdom, 2United Medical & Dental Schools of Guy's & St. Thomas, London Bridge, London, England, Uk |
|