| | |
| 3101 | Survival rate of brackets bonded with halogen/plasma arc light
P. NGAN, M. SIGNORELLI, E. KAO, and M. GLADWIN, West Virginia University, School of Dentistry, Morgantown, USA |
| 3102 | Bond Strengths of Composite and Enamel with 4 Bonding Agents
J.C. CHANG, L.M. PINZON, and J.M. POWERS, University of Texas Health Science Center at Houston Dental Branch, USA |
| 3103 | Bond strength of newly developed all-in-one adhesive to intact enamel
A. ISHIKAWA1, C. IMAMIYA1, Y. SHIMADA1, and J. TAGAMI2, 1Tokyo Medical & Dental University, Graduate School, Faculty of Dentistry, Japan, 2COE Program, FRMDRTB at TMDU, Tokyo Medical & Dental University, Tokyo, Japan |
| 3104 | Bond Strength of Newly Developed Esthetic Material TMX-200 to Enamel
C. IMAMIYA1, A. ISHIKAWA1, Y. SHIMADA1, and J. TAGAMI2, 1Tokyo Medical & Dental University, Japan, 2COE Program, FRMDRTB at TMDU, Tokyo Medical & Dental University, Tokyo, Japan |
| 3105 | Microhardness Testing of Bovine Enamel Surfaces After Different Surface Treatments
M. TOLEDANO1, R. OSORIO1, M. MOREIRA1, E. OSORIO1, A. ALBADALEJO1, F.R. TAY2, and D.H. PASHLEY3, 1University of Granada, Spain, 2The University of Hong Kong, China, 3Medical College of Georgia, Augusta, USA |
| 3106 | Primer Agitation and Bond Strength to Enamel and Dentin
R. OSORIO1, M. TOLEDANO1, M. MOREIRA1, E. OSORIO1, H. GONZALEZ1, F.R. TAY2, and D.H. PASHLEY3, 1University of Granada, Spain, 2The University of Hong Kong, China, 3Medical College of Georgia, Augusta, USA |
| 3107 | Evaluation of Orthodontic Bracket Bond Strengths Using LED Curing Units
K.G. SPILLANE, E. TUFEKCI, J.M. CARTER, P.C. MOON, and S.J. LINDAUER, Virginia Commonwealth University - VCU/MCV, Richmond, USA |
| 3108 | Ground Enamel Shear Bond Strength of Adhesives after Bleaching
Y. WANG, L.J. SHARP, and B.I. SUH, Bisco, Inc, Schaumburg, IL, USA |
| 3109 | Enamel/Dentin Bond Strength
L.G. WATANABE, E. BEDOLLA, G.T. NONOMURA, G.W. MARSHALL, and S.J. MARSHALL, University of California San Francisco, USA |
| 3110 | Effect of Antimicrobial Agents on Bond Strength
S. MALKOC1, A. DEMIR1, A. SENGUN1, and F. OZER2, 1Selcuk University, Konya, Turkey, 2University of Selcuk, Konya, Turkey |
| 3111 | Enamel and Dentin Bond Strengths Curing and Not Curing Adhesive
J.L. CHAPMAN1, J.M. DAVIDSON1, J.O. BURGESS2, and D.E. MERCANTE2, 1Louisiana State University Health Sciences Center School of Dentistry, Center of Excellence of Craniofacial and Oral Biology, New Orleans, USA, 2Louisiana State University Health Sciences Center School of Dentistry, New Orleans, USA |
| 3112 | LED Curing in Orthodontics: Evaluation of Time Exposure
P. LAVERNHE, C. LODTER, R. PIQUET, C. ARNAUD, and E. ESTIVALÈZE, Faculte de Chirurgie Dentaire, Toulouse, France |
| 3113 | Effectiveness of Technique Demonstrations on Enamel Bond Strength
S.A. ANTONSON1, M. SHU2, D. ANTONSON1, and P. HARDIGAN1, 1Nova Southeastern University, Fort Lauderdale, FL, USA, 2Nova Southeastern University, Ft. Lauderdale, FL, USA |
| 3114 | Shear bond strength between orthodontic self-etching primers versus conventional
J. ERRERA1, J. BURCH1, P. VILLALTA2, F.G.-G. GARCIA-GODOY3, and N. BURNS1, 1Nova Southeastern University, Ft Lauderdale, FL, USA, 2Nova Southeastern University, College of Dental Medicine, Fort Lauderdale, FL, USA, 3Nova Southeastern University |
| 3115 | Enamel Roughness/Bond Strength After H3PO4 and/or Self-Etching Primer Application
A.F. REIS, Universidade Estadual de Campinas, Piracicaba Dental School, Piracicaba - SP, Brazil, F.H.B. AGUIAR, Universidade Estadual de Campinas, Piracicaba Dental School, Piracicaba, Brunei, P. PEREIRA, University of North Carolina, Chapel Hill, USA, and M. GIANNINI, Universidade Estadual de Campinas, Piracicaba - SP, Brazil |
| 3116 | Evaluation of microleakage and enamel bond strength of adhesive systems
M.S. MIRANDA1, T. RABELLO2, K. DIAS1, and C.M. GARCIA2, 1UERJ, UFRJ, Rio de Janeiro, Brazil, 2UFRJ, Rio de Janeiro, Brazil |
| 3117 | Salivary Biofilm Contamination After Application of Orthodontic Self-etching Primer
S.A. NORDSTROM, R.J. MITCHELL, C.S. BEEMAN, E.P. HICKS, G.T. KLUEMPER, J. LUAN, and M.-O. KIM, University of Kentucky, Lexington, USA |
| 3118 | Bond Strength of Resin Adhesive Systems to Enamel and Dentine
T. KIMISHIMA1, Y. NARA1, T. EGURO1, T. MASEKI1, and I.L. DOGON2, 1Nippon Dental University, Tokyo, Japan, 2Harvard University, Forsyth Institute, Boston, MA, USA |
| 3120 | Effect of Bleaching on Adhesion of Composite to Enamel
N. ÜNLÜ1, F.K. COBANKARA1, and F. ÖZER2, 1Selcuk University, Faculty of Dentistry, Konya, Turkey, 2Selcuk University, Konya, Turkey |
| 3121 | Bond Strength of Self-Etch Adhesives Using Different Techniques
A. GONZALEZ, Universidad de Costa Rica, School of Dentistry, San Pedro, Costa Rica, and D. LAFUENTE, Universidad de Costa Rica, School of Dentistry, San Pedro, Costa Rica |
| 3122 | Influence of Thermal Cycling on Adhesion of Various Self-Etching Adhesives
J. SANG, H. LIU, and L.C. HAYES, Dentsply International, L.D. Caulk Division, Milford, DE, USA |
| 3123 | Enamel and dentin adhesive bond strenght conditioned with boric acid
L.C. COSTA, Bauru Dental School, Brazil, and J.C. PEREIRA, Bauru Dental School, Brazil |
| 3124 | Shear Bond Strength Comparisons Using 3 Generations of Bonding Agents
R. CALLAN, W.D. BROWNING, M.C. DOWNEY, and W. BRACKET, Medical College of Georgia, Augusta, USA |
| 3125 | The Influence of Conditioning Time on Enamel Adhesion
J. PERDIGAO1, G. GOMES2, V.M. AUGUSTO3, S. DUARTE, Jr.4, M.M. LOPES1, and J.R. PERDIGAO1, 1University of Minnesota, Minneapolis, USA, 2Private Practice, S. Domingos de Rana, Portugal, 3Private Clinic, Oeiras, Portugal, 4University of Minnesota, Sao Paulo State University, Minneapolis, USA |
| 3126 | Effects of Enamel Prism Orientation on Micro-Tensile-Bond-Strength
G. MONCADA1, E. FERNANDEZ2, J. VELIZ2, A. BADILLO2, and J. MARTIN2, 1Universidad de Chile, Faculty of Dentistry, Santiago, RM, Chile, 2Universidad de Chile, Santiago, RM, Chile |
| 3127 | Orthodontic Sealer Effects on Enamel Bond Strength with Cariogenic Exposure
B.L. CREED1, J.D. ENGLISH1, K.R. MCGRORY1, J.M. POWERS2, and K.K. CAIN1, 1University of Texas Health Science Center at Houston Dental Branch, USA, 2University of Texas Health Science Center at Houston Dental Branch, Houston Biomaterials Research Center, USA |
| 3128 | Flexural Strength and Modulus of Interface Between Composite and RMGI
M.L. CANNON, Grove Medical Center, Northwestern University, Long Grove, IL, USA, and R. JURADO, Northwestern University, Chicago, IL, USA |
| 3129 | Bond Strength of Adhesive Resin Cements to Tooth Structure
J.M. POWERS1, L.M. PINZON1, and M. KIMURA2, 1University of Texas Health Science Center at Houston Dental Branch, Houston Biomaterials Research Center, USA, 2Tokuyama Dental Corp, Tsukuba, Japan |
| 3130 | Bonding of Paint Resin onto Prosthetic Resin Composite
K. MURAGUCHI1, S. SUZUKI2, H. MINAMI1, and T. TANAKA1, 1Kagoshima University, Japan, 2University of Alabama, Birmingham, USA |
| 3131 | Effect of Delayed Polishing on Gap Formation in Flowable Composites
M. IRIE, Okayama University, Graduate School of Medicine and Dentistry, Japan, and K. SUZUKI, Okayama University, Graduate School of Medicine and Dentistry, Japan |
| 3132 | Bonding of Fiber-reinforced Composite Post to Root Canal Dentin
A.-M. LE BELL, L. LASSILA, and P. VALLITTU, University of Turku, Finland |
| 3133 | Corrosive-Wear of Two Microfil Resin Composites
P.M. ANAND, X. XIN, R. MOISEYEVA, P. RITWIK, and N.K. SARKAR, Louisiana State University School of Dentistry, New Orleans, USA |
| 3134 | Influence of Flowable Composites on Marginal Adaptation of Class-II-Restorations
K. SAUERZWEIG, C.R. GERNHARDT, and H.-G. SCHALLER, Martin-Luther-University Halle, Germany |
| 3135 | Effect of Component and Shape of Posts on Fracture Aspects
J.-M. BAE, J.-S. PARK, Y.-J. KIM, E.-H. LEE, and S.-K. MIN, Wonkwang University, College of Dentistry, IkSan-city, South Korea |
| 3136 | Repairing aged composites with self-etching systems: an in-vitro bond-strength study
E.C. TEIXEIRA, J.Y. THOMPSON, S.C. BAYNE, A.V. RITTER, and E.J. SWIFT, University of North Carolina, Chapel Hill, USA |
| 3138 | Fatigue of Composite Using Phosphoric Acid and Two Self-Etching Systems
L.D. DILLON1, R.S. WILLIAMSON2, and L.D. ZARDIACKAS1, 1University of Mississippi, Jackson, USA, 2University of Mississippi, Jackson |
| 3139 | Microtensile Bond Strength Between Ceramic and a Composite Resin
D.K. OYAFUSO1, L.F. VALANDRO2, M.K. ITINOCHE1, M.A. BOTTINO1, and F.P. CAMARGO3, 1Universidade Est. Paulista Julio Mesquita, São José dos Campos, Brazil, 2Federal University of Santa Maria, Santa Maria - RS, Brazil, 3PAULISTA STATE UNIVERSITY, Sao José dos Campos, Brazil |
| 3140 | LED and Halogen Photo-Curing Potential Upon Self-Etching Adhesives and Composites
A.C.V. GOMES FILHO, Vigodent S/A Ind. Com, Rio De Janeiro, RJ, Brazil, C.C.S. CAVALHEIRO, Universidade de São Paulo/IQSC, São Carlos, Brazil, W.G. MIRANDA JR, University of São Paulo, Brazil, F.A. RUEGGEBERG, Medical College of Georgia, Augusta, USA, and I.C. CORREA, University of Gama Filho, Rio de Janeiro, Brazil |
| 3141 | Effect of Thermal Cycling on Nanoleakage of Dual-cure Resin Cements
T. KANNO1, R.M. FOXTON2, M. NAKAJIMA1, J. TAGAMI3, and H. MIURA1, 1Tokyo Medical & Dental University, Japan, 2Guy's, King's and St.Thomas' Dental Institute, London, United Kingdom, 3COE Program, FRMDRTB at TMDU, Tokyo Medical and Dental University, Tokyo, Japan |
| 3142 | Repair bond strength of restorative composite to fiber-reinforced composite substrate
A. TEZVERGIL1, L.V.J. LASSILA1, E. DEMIREL2, and P.K. VALLITTU1, 1University of Turku, Institute of Dentistry, Finland, 2Gazi Universitesi, Ankara, Turkey |
|