| | |
| 1887 | Comparison of copings margin rounding in wax and casting
S.M. PAULINO1, M.B. LEAL2, V.O. PAGNANO2, and O.L. BEZZON2, 1FORP-USP, Universidade de Ribeirão Preto - UNAERP, Ribeirão Preto, SP, Brazil, 2FORP-USP, Ribeirão Preto, Brazil |
| 1888 | Characteristics of commercial phosphate-bonded investments for quick heating
C.-C. YANG, M. YAN, and H.-H. YANG, Chung Shan Medical University, College of Oral Medicine, Taichung, Taiwan |
| 1889 | Dimensional Accuracy of Titanium Casting with Quick Heating Method
M. YAN1, H.-H. YANG1, C.-C. YANG1, H. TAKAHASHI2, and K. TONAMI2, 1Chung Shan Medical University, College of Oral Medicine, Taichung, Taiwan, 2Tokyo Medical & Dental University, Japan |
| 1890 | Optimization of the marginal gap of crowns by ultrasound-activated-suspended Al2O3-powder
S. LINSEN, D. WIRTZ, M. GOTTWALD, and B. KOECK, University of Bonn, Germany |
| 1891 | Mechanical Properties of Experimental Ti-Cu-Pd Alloys for Dental Castings
M. HATTORI, S. TAKEMOTO, M. YOSHINARI, E. KAWADA, and Y. ODA, Tokyo Dental College, Chiba, Japan |
| 1893 | Effect of Platinum on Melting Range of Gold Alloys
Y.-C. CHOI, Kyung Hee University, Seoul, South Korea, and H.-N. LIM, Kyung Hee University, Seoul, South Korea |
| 1894 | Casting of Gold Alloy by a New Argon Casting Machine
C.-C. HUNG, C.-F. TSAI, P.-L. LAI, C.-C. HUANG, J.-C. WANG, and H.-C. HUNG, Kaohsiung Medical University, Taiwan |
| 1895 | Evaluation of mechanical properties of cast low Fe titanium alloys
Q. GUO1, M. KOIKE2, L. MUTHUSWAMI3, M. KIKUCHI4, H. FUJII5, and T. OKABE1, 1Baylor College of Dentistry, Texas A&M University System Health Science Center, Dallas, TX, USA, 2Nagasaki University, Japan, 3Baylor College of Dentistry, Texas A&M University System Heatlh Science Center, Dallas, TX, USA, 4Tohoku University, Sendai, Japan, 5Nippon Steel Corporation, Chiba, Japan |
| 1896 | Grindability of cast low Fe titanium alloys
P. FORD1, Q. GUO1, M. KOIKE2, M. KIKUCHI3, H. FUJII4, and T. OKABE1, 1Baylor College of Dentistry, Texas A&M University System Health Science Center, Dallas, TX, USA, 2Nagasaki University, Japan, 3Tohoku University, Sendai, Japan, 4Nippon Steel Corporation, Chiba, Japan |
| 1897 | Mold filling of low Fe titanium alloys
H. SATO1, M. KOMATSU1, B.H. MILLER2, H. SHIMIZU3, H. FUJII4, and T. OKABE2, 1Tohoku University, Graduate School of Dentistry, Sendai, Japan, 2Baylor College of Dentistry, Dallas, TX, USA, 3Fukuoka Dental College, Japan, 4Nippon Steel Corporation, Chiba, Japan |
| 1898 | High temperature dimensional alterations of implant supported frameworks
D.K.D. VASCONCELLOS1, A.C. CARDOSO2, C.A. PAVANELLI1, L. BUSO1, and E. HILGERT1, 1Universidade Est. Paulista Julio Mesquita, São José dos Campos, Brazil, 2Universidade Federal De Santa Catarina, Florianópolis, Brazil |
|