| | |
| 1598 | Load Transfer Characteristics of Craniofacial Implant Systems
T. OGANESYAN, A.A. CAPUTO, and R. NISHIMURA, UCLA School of Dentistry, Los Angeles, CA, USA |
| 1599 | Fit of Fixture-Abutment-Screw Interface
J.H. JEONG, N.H. KIM, H.J. KIM, and H.J. YOO, Chosun University, Kwangju, South Korea |
| 1600 | Reduction of Insertion Torque in Very Dense Bone. Clinical Experience and Mechanical Measurements
R. JANSEN1, J. BRUNNER1, J. NEUGEBAUER, and D. HAESSLER, 1 FRIADENT GmbH, Mannheim, Germany |
| 1601 | WITHDRAWN
| | 1602 | Design and Examination of a Stability-detecting Device for Dental Implants
S.-Y. LEE, K.-Y. CHENG, H.-M. HUANG, and C.-T. LIN, Taipei Medical University, Taiwan |
| 1603 | Chemical Modification of Titanium Surface by Glow Discharge
M.-S. CHEN1, W.-J. CHANG1, C.-T. LIN1, S.-Y. LEE1, and Y. ABIKO2, 1 Taipei Medical University, Taiwan, 2 Nihon University, Matsudo, Japan |
| 1604 | Effect of Negatively Polarized Barium Titanate Thin Film, Formed on Ti, on Osteoblast Cell Activity
Y.-J. PARK1, Y.-H. JEONG1, Y.-R. LEE1, S.-R. NOH1, H.-J. SONG1, J.L. ONG2, and H.R. RAWLS2, 1 Chonnam National University, Gwangju, South Korea, 2 University of Texas Health Science Center at San Antonio, USA |
| 1605 | Correlative Study between Mechanical Property and Bone Mineral Density of Trabecular Bone in Human Mandibles
H. KIDO1, E.E. SCHULZ2, Q.G. DAI2, Y. NAGASHIMA1, H. NABESHIMA3, and M. MATSUURA1, 1 Fukuoka Dental College, Japan, 2 Loma Linda University, CA, USA, 3 Aichigakuin University, Nagoya, Japan |
| 1606 | Peri-implant Bone Strain Developed after Pre-load
M.-S. LEE, T.-M. WANG, J.-S. WANG, and L.-D. LIN, National Taiwan University, Taipei, Taiwan |
| 1607 | Restore a Molar with One or Two Implants -- A Finite Element Analysis
T.-M. WANG, M.-S. LEE, C.-F. CHANG, J.-S. WANG, and L.-D. LIN, National Taiwan University, Taipei, Taiwan |
| 1608 | XPS and XRD Characterization of Heat-treated Sputtered CaP Coatings
J.D. BUMGARDNER1, H. MARTIN1, K.H. SCHULZ1, Y. YANG2, D.L. CARNES2, and J.L. ONG2, 1 Mississippi State University, USA, 2 University of Texas Health Science Center at San Antonio, USA |
| 1609 | Fracture Surface Analysis of the Implant with Fatigue Failure
H.-M. HUANG, C.-C. CHANG, Y.-J. LO, C.-T. LIN, and S.-Y. LEE, Taipei Medical University, Taiwan |
| 1610 | Finite Element Analysis of Staggered Placement of Dental Implants
Y. SATO1, H. ITOH2, T. SASAKI2, T. OHASHI1, and M. SATO1, 1 Tohoku University Graduate School of Engineering, Sendai, Japan, 2 Tohoku University@Graduate School of dentistry, Sendai, Japan |
| 1611 | Influence of Cortical Anchorage on Implant Mobility
T. SUMIKAWA1, K. SARATANI2, T. KAWAZOE2, H. OKA3, and S.G. SHI4, 1 Graduate School, Osaka Dental University, Japan, 2 Osaka Dental University, Japan, 3 Okayama University Medical School, Japan, 4 306 Hospital of PLA, Beijing, China |
| 1612 | Stress Analysis of Screwed Implants with Internal and External Hexagonal Connections
L.A.D. MEIRELLES, and A.A. DEL BEL CURY, FOP-UNICAMP, Piracicaba, Brazil |
|